Carousel Buildings are a
patented Truss System for round pen or
pavilion roofs, located in
Southern Indiana, but shipping to the world.
Patented Truss
System on your level lot. 61 feet diameter,
leaves 60
clear feet. 11 foot ceiling height, using 14 foot posts
creates a 17 feet center height, with a free standing center.
Package includes
Steel Truss System, hangers, bolts, center hub,
and a directions
manual with drawings.
Price for above steel truss system - $12,000.00 plus shipping.
Side Elevation
Post and Truss Layout
Post and Truss Elevation
Not included in
the truss package are the materials you need to
build the round
pen system. All this lumber can be found at your
local
lumber yard. Below is a list of the lumber needed:
12 - 6 x 6 - 14 FT Treated
12 - 2 x 8 - 18 FT
24 - 2 x 6 - 16 FT
24 - 2 x 6 - 14 FT
24 - 2 x 6 - 12 FT
24 - 2 x 6 - 10 FT
48 - 2 x 4 - 16 FT
60 Sheets 3 FT Steel Roofing 8 FT 8 Inches
24 Sheets 3 FT Steel Roofing 25 Ft
40 Pieces Ridge Cap
Screws for metal
Concrete for Posts
10 pounds 16 cc nails for bracing
10 pounds 1 1/2 screws for purlins
Approximate cost of above materials supplied by customer $5000.00
Total cost of round pen or pavilion with steel truss system $17,000.00
Also available is
a 8 FT Cupola which we build and ship with the
steel truss
system. Cost is approximately $2500.00
Based on 20 LB Snow Load and 90 MPH Wind.
Check your local building codes for your area.
Patented Truss
System on your level lot. 44' 8" feet diameter,
leaves 43'9"
clear feet. 11 foot ceiling height, using 14 foot posts
creates a 17 foot center height, with a free standing center.
Package includes
Steel Truss System, hangers, bolts, center hub,
and a directions
manual with drawings.
Price for above steel truss system - $8,500.00 plus shipping.
Not included in
the truss package are the materials you need to
build the round
pen system. All this lumber can be found at your
local
lumber yard. Below is a list of the lumber needed:
12 - 6 x 6 - 14 FT Treated
24 - 2 x 6 - 12 FT
24 - 2 x 6 - 10 FT
48 - 2 x 4 - 14 FT
24 Sheets 3 FT Steel Roofing 24' 6"
30 Pieces Ridge Cap
Concrete for Posts
6 Bags 2" Screws for metal
2 Bags 3/4" Stitch Screws (For Ridge Caps)
10 pounds 16 cc nails for bracing
5 pounds 1 1/2" screws for wood
The Steel Truss System includes all bolts, nuts, hangers, etc..
The cupola Also available is
a 8 FT Cupola which we build and ship with the
steel truss
system. Cost is approximately $2500.00
Patented Truss System on your level lot.
60' x 124' arena
Patented Truss
System on your level lot.
60' x 124'
feet diameter,
leaves 60 x 123 clear feet. 61x124 Outside. 11 foot ceiling height, using 14 foot posts
creates a 17 foot center height, with a free standing center.
Package includes
Steel Truss System, hangers, bolts, center hub,
and a directions
manual with drawings.
Price for above steel truss system - $30,000.00 plus shipping.
Not included in
the truss package are the materials you need to
build the round
pen system. All this lumber can be found at your
local
lumber yard. Below is a list of the lumber needed:
28 - 6 x 6 - 14 FT Treated
12 - 2 x 8 - 18 FT
8- 2 x 8 - 16 FT
24 - 2 x 6 - 16 FT
24 - 2 x 6 - 14 FT
24 - 2 x 6 - 12 FT
24 - 2 x 6 - 10 FT
176 - 2 x 4 - 16 FT
60 Sheets 3 FT Steel Roofing 8 FT 8 Inches
24 Sheets 3 FT Steel Roofing 25 FT
43 Sheets 3 FT Steel Roofing 33 FT
47 Pieces Ridge Cap
Screws for metal
Concrete for Posts
20 pounds 16 cc nails for bracing
20 pounds 1 1/2 screws for purlins
8 FT increments can be added or subtracted at $2000 each for the Steel Truss System.
Materials for each 8 FT increment is as follows:
2 - 6 x 6 - 14 FT Treated
1 - 2x8 - 16 FT
16 - 2 x 4 - 16 FT
3 Sheets 3 FT Steel Roofing 33 Ft
8 Pieces Ridge Cap
Approximate cost of above materials supplied by customer $12,000.00
Call us today for your quote or for more information.
Phone: 812-596-3300
Fax: 812-734-0899
